Kapasitör Aktif Dengeleme Kartı 4S 3A, Üçlü Lityum Pil için Enerji Transfer Kartı

Detaylı bilgi

Item Type:

 Battery Active Balancer

Material:

Plastic

Size:

Approx. 47 x 28 x 17mm / 1.9 x 1.1 x 0.7in (4S 3A)

Working Voltage (Single Battery):

3.0V~4.3V

Over Discharge Protection Voltage:

3.0V

Standby Current:

0.1mA~0.2mA (when the voltage of a single cell is lower than 3V, or when the switch is in the OFF position)

Quiescent Current:

3mA

Scope of application:

all ternary lithium batteries and iron lithium batteries are universal

Package List:

1 x Battery Active Balancer :

Note:

Note 1:

before wiring or connecting the plug, must first switch to OFF position!!

Confirm the correct wiring sequence again, and then switch to the ON position to start the work. :

0V is the total negative pole of the battery pack, wiring from 0V in order, wrong line will burn board! :

Note 2:

use 0.3mm² or more copper wire connection, the thicker the better, the shorter the better.

(recommended 18AGW, 20AWG, 22AWG) :

Note 3:

When working with high current, it is normal to have slight noise. After connecting the battery for the first time or shutting down the battery for a long time, the startup is slow and please wait patiently.

When the switch is turned OFF, the indicator light will not immediately go OFF because the capacitor has a residual charge. :

Note:

The 4S version, when used for 3 battery strings, can use idle small capacity of the fourth battery to make up the number, otherwise it will be difficult to start or easy to break down.