Nuojıe Bahçe Sulama Sistemi Araçları Otomatik Su Seviye Kontrol Vanası G1 / 2 G3 / 4 şamandıra valfi Su Deposu Su Kulesi Dikey

Detaylı bilgi

Packing:

1 piece

Export thread:

G1 / 2, G3 / 4

Name:

Automatic water level control valve

Material:

nylon PA66 + food grade rubber

Working pressure range:

0.02~0.8Mpa

Applicable medium:

clean water

Temperature resistance:

0℃～70℃

Installation method:

internal installation, external installation

Water inlet method:

top inlet, side inlet

Suitable for water tower swimming pool, solar energy, toilet, aquaculture, agricultural irrigation, food machinery, humidifier, water heater, livestock drinking fountain, swimming pool, etc. :

feature:

This valve replaces the traditional float valve and can be used in various systems such as high water tanks, pools, industrial water towers and civil buildings. :

Automatic control, low self-replenishment, automatic stop of water output :

Beautiful appearance, small size, practical, simple installation :

No electricity, easy to use, long life, low failure rate, saving water resources :

When the water level of the pool or tank drops, the valve body will sink, and then the pilot valve of the control valve will be opened. Due to the influence of pipeline water pressure, the sealing surface of the control valve will open. Finally the water came out, and vice versa :

This product is a liquid level control valve. After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet line. First, fix the water inlet pipeline on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard. The main water inlet should be lined with the normal diameter of the control valve. When in use, the stop valve should be fully opened. If two valves are installed in the same tank, the two valves should be kept in the same horizontal plane. Before installation, :